Show simple item record

dc.contributor.authorM. B. Smith
dc.contributor.authorJ. M. Logan
dc.contributor.authorM. D. Wood
dc.date.accessioned2017-05-08T23:08:25Z
dc.date.available2017-05-08T23:08:25Z
dc.date.copyrightJune, 1980
dc.date.issued1980
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26378#99_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/93150
dc.description.abstractA small-scale, shallow experiment was conducted by Amoco Production Research, Sandia Laboratories, and the U. S. Geological Survey, in order to study the potential of several geophysical monitoring techniques for determining in-situ fracture geometry. The program included core analysis, surface strain gage over-coring, borehole measurements, tiltmeter surveys, surface electric potential measurements, and post-coring. Each of the techniques correctly measured an East-West fracture which was longer to the East. This azimuth was apparently controlled by in-situ stresses, and it was noted that these were not affected by a horizontal stress relief located due East of the site.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFracture Azimuth—A Shallow Experiment
dc.typeJournal Paper
dc.journal.volume102
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3227858
dc.journal.fristpage99
dc.journal.lastpage105
dc.identifier.eissn1528-8994
dc.keywordsFracture (Process)
dc.keywordsMeasurement
dc.keywordsStress
dc.keywordsGeometry
dc.keywordsStrain gages AND Electric potential
dc.treeJournal of Energy Resources Technology:;1980:;volume( 102 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail
This item appears in the following Collection(s)

Show simple item record