Show simple item record

dc.contributor.authorJ. L. Jellison
dc.contributor.authorC. F. Huff
dc.date.accessioned2017-05-08T23:08:25Z
dc.date.available2017-05-08T23:08:25Z
dc.date.copyrightJune, 1980
dc.date.issued1980
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26378#70_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/93146
dc.description.abstractThe development of the gas pressure diffusion bonding technique for attachment of StratapaxR diamond cutters to studs or bit blanks is reviewed in this paper. This paper updates the results presented previously on a continuing project conducted for the Division of Oil, Gas, Shale and In Situ Technology, Department of Energy. The process has been developed to a point where bonded parts can be obtained from commercial suppliers. A complete description is given of the latest bonding process including surface conditioning, metallization, canning, and gas pressure bonding. Results from experiments designed to facilitate reliable fabrication are included. Bond strengths of samples obtained from commercial suppliers have shear strengths (500 MPa) comparable to those developed at Sandia Laboratories. Results from laboratory drilling experiments are included. These tests were run to demonstrate the reliability of the bond in a cyclic load environment. With a suitable attachment technique and adequate cooling, the Stratapax has demonstrated superior cutting capabilities in rock with rates of penetration to 7.6 mm/s in Sierra White Granite.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Review of Attachment of StratapaxR Using Gas Pressure Diffusion Bonding
dc.typeJournal Paper
dc.journal.volume102
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3227854
dc.journal.fristpage70
dc.journal.lastpage76
dc.identifier.eissn1528-8994
dc.keywordsDiffusion bonding (Metals)
dc.keywordsPressure
dc.keywordsBonding
dc.keywordsDrilling
dc.keywordsReliability
dc.keywordsCooling
dc.keywordsManufacturing
dc.keywordsStress
dc.keywordsShear (Mechanics)
dc.keywordsBond strength
dc.keywordsCutting
dc.keywordsDiamonds
dc.keywordsRocks AND Blanks
dc.treeJournal of Energy Resources Technology:;1980:;volume( 102 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record