Show simple item record

dc.contributor.authorG. D. Galletly
dc.contributor.authorR. W. Aylward
dc.date.accessioned2017-05-08T23:07:33Z
dc.date.available2017-05-08T23:07:33Z
dc.date.copyrightFebruary, 1979
dc.date.issued1979
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28170#64_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/92603
dc.description.abstractIn the first part of the paper, plastic collapse pressures of thin 2:1 ellipsoidal shells are determined. The effects of E, σyp and strain hardening, S, on the collapse pressure are presented and discussed. The second part of the paper is concerned with the controlling failure pressures of internally pressurized 2:1 ellipsoidal shells. This involves the consideration of both plastic collapse pressures and asymmetric buckling pressures (the latter were obtained from a companion paper). Curves of the controlling failure pressures versus D/t are given for several values of σyp and S. Both aluminum and steel shells are considered. Dimensionless buckling and collapse pressures are also tabulated and some very simple formulas for both failure modes are suggested which should be useful to designers.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePlastic Collapse and the Controlling Failure Pressures of Thin 2:1 Ellipsoidal Shells Subjected to Internal Pressure
dc.typeJournal Paper
dc.journal.volume101
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454600
dc.journal.fristpage64
dc.journal.lastpage72
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsCollapse
dc.keywordsFailure
dc.keywordsShells
dc.keywordsBuckling
dc.keywordsWork hardening
dc.keywordsFormulas
dc.keywordsAluminum AND Steel
dc.treeJournal of Pressure Vessel Technology:;1979:;volume( 101 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail
This item appears in the following Collection(s)

Show simple item record