Show simple item record

dc.contributor.authorL. B. Freund
dc.contributor.authorD. M. Parks
dc.contributor.authorV. C. F. Li
dc.date.accessioned2017-05-08T23:07:33Z
dc.date.available2017-05-08T23:07:33Z
dc.date.copyrightFebruary, 1979
dc.date.issued1979
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28170#51_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/92600
dc.description.abstractBecause of the difficulties which have been encountered in efforts to establish fracture toughness standards for arrest of running shear fractures in pressurized pipelines, the possibility of introducing mechanical crack arresters on such pipelines is currently being explored. The purpose here is to discuss the mechanics of the crack arrest process for a mechanical arrester which is fabricated by loosely thread wrapping ductile steel wire rod around a segment of the pipe. The net effect of the wire rod arrester as the crack approaches is to substantially increase the axial in-plane strain in the pipe wall adjacent to the fracture path from the value it would have in the absence of the arrester. The result is that, in the presence of the arrester, the growth of a circumferential tensile fracture can become more favorable than continued growth of the axial tensile fracture, and a criterion for arrest of the axial fracture based on this result is proposed. Through an analysis of rapid crack propagation in a pressurized pipeline, the arrest criterion leads to an expression for the minimum ductility of the wire rod necessary for crack arrest. The required minimum ductility for the wire rod is estimated for system parameters corresponding to available full-scale test data, and the results compare favorably with the independently measured actual ductility of the arrester material.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Analysis of a Wire-Wrapped Mechanical Crack Arrester for Pressurized Pipelines
dc.typeJournal Paper
dc.journal.volume101
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454598
dc.journal.fristpage51
dc.journal.lastpage58
dc.identifier.eissn1528-8978
dc.keywordsWire
dc.keywordsPressure pipes
dc.keywordsFracture (Materials)
dc.keywordsFracture (Process)
dc.keywordsWire rod
dc.keywordsDuctility
dc.keywordsPipes
dc.keywordsCrack propagation
dc.keywordsFracture toughness
dc.keywordsSteel
dc.keywordsThread
dc.keywordsPipelines AND Shear (Mechanics)
dc.treeJournal of Pressure Vessel Technology:;1979:;volume( 101 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record