Show simple item record

dc.contributor.authorM. S. M. Rao
dc.contributor.authorT. V. Narayanan
dc.contributor.authorG. D. Gupta
dc.date.accessioned2017-05-08T23:07:30Z
dc.date.available2017-05-08T23:07:30Z
dc.date.copyrightAugust, 1979
dc.date.issued1979
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28176#235_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/92575
dc.description.abstractThe elastic-plastic-creep analysis of a thick cylindrical tube supported at the ends by elastic springs and subjected to nonaxisymmetric thermal and pressure loads is considered. The exact elasticity solution based on Fourier series is extended to determine the incremental plasticity and creep solutions. The plasticity problem is treated by using the concept of “initial stress.” Ziegler’s modification of Prager’s kinematic hardening rule is used in the elastic-plastic solution. The uniaxial stress-strain curve is assumed to be bilinear and the yield stress may be temperature dependent. The creep solution is obtained by using a strain hardening approach. Two examples of solar superheaters subjected to diurnal temperature and pressure cycles are solved by the present method and compared to the finite element solutions. The comparison shows excellent agreement between the solutions. The cost of computation of the present method is considerably smaller than that of the finite element method. The problem has applications in the conventional fossil-fired steam generators as well as in other power systems.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInelastic Analysis of Nonaxisymmetrically Heated Thick Cylindrical Shells
dc.typeJournal Paper
dc.journal.volume101
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454628
dc.journal.fristpage235
dc.journal.lastpage241
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsElasticity
dc.keywordsPlasticity
dc.keywordsCreep
dc.keywordsTemperature
dc.keywordsPower systems (Machinery)
dc.keywordsStress
dc.keywordsSuperheaters
dc.keywordsHardening
dc.keywordsFinite element methods
dc.keywordsStress-strain curves
dc.keywordsBoilers
dc.keywordsFinite element analysis
dc.keywordsInelastic analysis
dc.keywordsPipes
dc.keywordsSolar energy
dc.keywordsComputation
dc.keywordsCycles
dc.keywordsFourier series
dc.keywordsSprings
dc.keywordsWork hardening AND Yield stress
dc.treeJournal of Pressure Vessel Technology:;1979:;volume( 101 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record