Show simple item record

dc.contributor.authorG. D. Galletly
dc.contributor.authorS. K. Radhamohan
dc.date.accessioned2017-05-08T23:07:30Z
dc.date.available2017-05-08T23:07:30Z
dc.date.copyrightAugust, 1979
dc.date.issued1979
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28176#216_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/92573
dc.description.abstractThe elastic-plastic buckling of internally pressurized torispherical shells is considered in some detail in the paper. The effects of geometric parameters (r/D, RS /D and D/t) and material properties (σyp , E and the strain-hardening coefficient) on the elastic-plastic internal buckling pressures were investigated using the BOSOR 5 program. Based on the results of the parametric study, approximate formulas for predicting the elastic-plastic internal buckling pressures are suggested. These should be useful to designers.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleElastic-Plastic Buckling of Internally Pressurized Thin Torispherical Shells
dc.typeJournal Paper
dc.journal.volume101
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454626
dc.journal.fristpage216
dc.journal.lastpage225
dc.identifier.eissn1528-8978
dc.keywordsBuckling
dc.keywordsShells
dc.keywordsWork hardening
dc.keywordsFormulas AND Materials properties
dc.treeJournal of Pressure Vessel Technology:;1979:;volume( 101 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record