Show simple item record

dc.contributor.authorC. C. Schultz
dc.contributor.authorH. M. Zien
dc.date.accessioned2017-05-08T23:07:29Z
dc.date.available2017-05-08T23:07:29Z
dc.date.copyrightNovember, 1979
dc.date.issued1979
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28178#321_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/92564
dc.description.abstractThe results of inelastic finite element analyses of several uniaxial specimens used for low-cycle fatigue and cyclic plasticity testing are presented. The test specimens studied include both hourglass and uniform gage-type geometries. These results indicate that normally used hourglass specimens may significantly underestimate the strain for a given stress. Uniform gage specimens with commonly used length-to-diameter ratios are shown to provide adequate stress-strain data. Two extensively strain-gaged uniform gage specimens were tested to provide data to confirm the acceptability of the inelastic analysis methods.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleVerification of Specimens for Low-Cycle Fatigue and Cyclic Plasticity Testing
dc.typeJournal Paper
dc.journal.volume101
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454640
dc.journal.fristpage321
dc.journal.lastpage327
dc.identifier.eissn1528-8978
dc.keywordsPlasticity
dc.keywordsTesting
dc.keywordsLow cycle fatigue
dc.keywordsGages
dc.keywordsStress
dc.keywordsFinite element analysis AND Inelastic analysis
dc.treeJournal of Pressure Vessel Technology:;1979:;volume( 101 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record