Show simple item record

dc.contributor.authorR. E. Frishmuth
dc.date.accessioned2017-05-08T23:06:55Z
dc.date.available2017-05-08T23:06:55Z
dc.date.copyrightJanuary, 1979
dc.date.issued1979
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26867#75_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/92241
dc.description.abstractThe establishment of inspection criteria for wheels in rotating machinery is frequently a complex issue. On one hand, safety and reliability of the parts and equipment must be assured while on the other, economical use must be made of available materials. In addition to these often opposing criteria, account must be taken of the limitations and cost of non-destructive evaluation methods. One way of considering all these factors and establishing safe inspection and acceptance criteria for wheels is to employ linear elastic fracture mechanics (LEFM) methods. The purpose of this paper is to outline a method for using LEFM to establish allowable stress levels or fracture toughness required in turbine wheel ferritic steels. The methods proposed are discussed in schematic fashion and it is shown that general application of a single “design curve” to many situations is possible if accuracy in specific cases is sacrificed. If this sacrifice is made so that results are conservative then the resulting plots can be used during the design of the wheel, the acceptance of a part or the evaluation of remaining life of an in-service wheel.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleUse of Fracture Mechanics Methods for Establishing Inspection Level for Turbine Wheels
dc.typeJournal Paper
dc.journal.volume101
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443654
dc.journal.fristpage75
dc.journal.lastpage79
dc.identifier.eissn1528-8889
dc.keywordsInspection
dc.keywordsFracture mechanics
dc.keywordsTurbines
dc.keywordsWheels
dc.keywordsDesign
dc.keywordsAcceptance criteria
dc.keywordsFracture toughness
dc.keywordsMachinery
dc.keywordsSteel
dc.keywordsSafety
dc.keywordsReliability
dc.keywordsNondestructive evaluation AND Stress
dc.treeJournal of Engineering Materials and Technology:;1979:;volume( 101 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record