Show simple item record

dc.contributor.authorM. H. El Haddad
dc.contributor.authorK. N. Smith
dc.contributor.authorT. H. Topper
dc.date.accessioned2017-05-08T23:06:54Z
dc.date.available2017-05-08T23:06:54Z
dc.date.copyrightJanuary, 1979
dc.date.issued1979
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26867#42_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/92236
dc.description.abstractPrevious studies have shown that both threshold stress intensity factors and fatigue crack growth rates are dependent on crack size. The average growth rates for very short cracks considerably exceed those given by conventional stress intensity-crack growth laws fitted to long crack data. Elastic and elastic plastic fracture mechanics solutions are modified to predict this behavior of short cracks by introducing an effective crack length l0 into the solutions for intensity factors and the J integral method of analysis. The threshold stress at a very short crack length approaches the fatigue limit of the material, and therefore the value of l0 can be obtained once the threshold stress intensity factor and the fatigue limit are known. The accuracy of the term l0 in predicting crack growth rates for short cracks is found to be independent of the applied strain level. It varies linearly with the grain size of the material and can be considered at the surface as a measure of the reduced flow resistance of surface grains due to their lack of constraint.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFatigue Crack Propagation of Short Cracks
dc.typeJournal Paper
dc.journal.volume101
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443647
dc.journal.fristpage42
dc.journal.lastpage46
dc.identifier.eissn1528-8889
dc.keywordsFracture (Materials)
dc.keywordsFatigue cracks
dc.keywordsStress
dc.keywordsFatigue limit
dc.keywordsGrain size
dc.keywordsFlow (Dynamics)
dc.keywordsFracture mechanics AND Electrical resistance
dc.treeJournal of Engineering Materials and Technology:;1979:;volume( 101 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record