Show simple item record

dc.contributor.authorYoshito Mitani N.
dc.date.accessioned2017-05-08T23:06:53Z
dc.date.available2017-05-08T23:06:53Z
dc.date.copyrightJanuary, 1979
dc.date.issued1979
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26867#18_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/92231
dc.description.abstractThe dependence of drawability in carbon steel on the grain size shows that a finer grain size is desirable for the better production. On the other hand, the characteristics of fracture in Olsen cup test are determined by the microstructural inhomogeneity. Several microstructures are prepared by adequate heat treatment and the formability and fracture mode are examined from the point of view of microstructural inhomogeneity. Good correlation between the second phase distribution and the formability in deep drawing is obtained. An anisotropic factor R/ΔR also well explains the formability.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInfluence of Microstructural Inhomogeneity on the Formability and Fracture of a Carbon Steel
dc.typeJournal Paper
dc.journal.volume101
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443639
dc.journal.fristpage18
dc.journal.lastpage21
dc.identifier.eissn1528-8889
dc.keywordsCarbon steel AND Fracture (Process)
dc.treeJournal of Engineering Materials and Technology:;1979:;volume( 101 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record