Show simple item record

dc.contributor.authorTurgay Ertürk
dc.contributor.authorHoward A. Kuhn
dc.date.accessioned2017-05-08T23:06:53Z
dc.date.available2017-05-08T23:06:53Z
dc.date.copyrightJanuary, 1979
dc.date.issued1979
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26867#3_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/92229
dc.description.abstractFundamental deformation and fracture behavior of fiber-reinforced metal-matrix composites under deformation processing conditions were determined using upset tests on rectangular specimens. Defects that occur during simulated forging of a 2024 Al-alloy matrix reinforced with 25v/o stainless steel wires were characterized, and forming limit criteria for their prediction and prevention established. These criteria, determining the limits of deformation, provided guidelines for development of a process for forging an airfoil shape from the composite system studied. To this end, the limiting criteria were combined with an analysis of the flow of metal during forging. The forging design method developed, based on the forming limit criteria, demonstrates a rational approach to the design of processes for forging complex shapes from composite materials. Utilizing this approach, process parameters (die and preform geometry, lubrication) can be evaluated for forging sound complex composite shapes.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleUse of Forming Limit Criteria in Forging Complex Shapes From Metal-Matrix Composites
dc.typeJournal Paper
dc.journal.volume101
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443646
dc.journal.fristpage3
dc.journal.lastpage11
dc.identifier.eissn1528-8889
dc.keywordsMetals
dc.keywordsComposite materials
dc.keywordsForging
dc.keywordsShapes
dc.keywordsDeformation
dc.keywordsLubrication
dc.keywordsStainless steel
dc.keywordsAirfoils
dc.keywordsFlow (Dynamics)
dc.keywordsWire
dc.keywordsDesign
dc.keywordsDesign methodology
dc.keywordsFracture (Process)
dc.keywordsGeometry
dc.keywordsPreforms
dc.keywordsFibers
dc.keywordsAluminum alloys
dc.keywordsProduct quality AND Sound
dc.treeJournal of Engineering Materials and Technology:;1979:;volume( 101 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record