Show simple item record

dc.contributor.authorShuji Taira
dc.contributor.authorRyuichi Ohtani
dc.contributor.authorTakayuki Kitamura
dc.date.accessioned2017-05-08T23:06:53Z
dc.date.available2017-05-08T23:06:53Z
dc.date.copyrightApril, 1979
dc.date.issued1979
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26868#154_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/92220
dc.description.abstractCrack propagation tests in creep were carried out on 0.16 percent carbon steel at 400 and 500°C in air and at 400°C in vacuum, on Type 316 stainless steel at 600 and 650°C in air, and on Type 304 stainless steel at 650°C in air and vacuum. As a nonlinear fracture mechanics approach, the applicability of the creep J-integral for a controlling parameter of the crack propagation rate was investigated using a few types of specimens subjected to constant tensile loads. A good correlation was obtained between crack propagation rate and creep J-integral. Crack propagation rate was nearly proportional to the creep J-integral, and the relationship was almost independent on the width of plate specimens, the test temperatures, the testing environments, and the fracture mode. The creep crack propagation rate in round notched bar specimens was a little smaller than that in the center notched plate specimens at the same magnitude of the creep J-integral.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleApplication of J-Integral to High-Temperature Crack Propagation: Part I—Creep Crack Propagation
dc.typeJournal Paper
dc.journal.volume101
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443668
dc.journal.fristpage154
dc.journal.lastpage161
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsTemperature AND Crack propagation
dc.treeJournal of Engineering Materials and Technology:;1979:;volume( 101 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record