Show simple item record

dc.contributor.authorHideo Awaji
dc.contributor.authorSennosuke Sato
dc.date.accessioned2017-05-08T23:06:52Z
dc.date.available2017-05-08T23:06:52Z
dc.date.copyrightApril, 1979
dc.date.issued1979
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26868#139_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/92218
dc.description.abstractA new approach of diametral compressive testing with circular anvils is proposed. The circular anvils are used to select a suitable contact width or to avoid the collapse of the specimen in the contact edge. Furthermore, the statistical corrections on the diametral compressive strength for the effects of the size and stress distribution are explained by the application of Weibull’s statistical theory. The experimental results of the diametral compressive testing are compared with the uniaxial tensile strengths for some kinds of graphite and marble, and the discrepancies between the two strengths are discussed. According to our macroscopic brittle fracture criterion under biaxial stress state, which was proposed recently, the tensile strength can be deduced from the diametral compressive strength σHC* and the uniaxial compressive strength σC as follows, σt* = KICKIIC 12 σCσHC*(1+σx/σH)+σC {σHC*(1−σx/σH)−σC}+σC2 where σt* is the deduced tensile strength, σx /σH is the ratio of maximum and minimum principal stresses at the center of the disk, and KIC and KIIC are the values of Mode I and Mode II fracture toughness. The deduced values σt* are ascertained experimentally to agree very well with the uniaxial tensile strength in wide range of brittle materials, such as graphite and marble.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDiametral Compressive Testing Method
dc.typeJournal Paper
dc.journal.volume101
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443665
dc.journal.fristpage139
dc.journal.lastpage147
dc.identifier.eissn1528-8889
dc.keywordsTesting
dc.keywordsCompressive strength
dc.keywordsTensile strength
dc.keywordsGraphite
dc.keywordsStress
dc.keywordsStress concentration
dc.keywordsBrittleness
dc.keywordsDisks
dc.keywordsBrittle fracture
dc.keywordsCollapse AND Fracture toughness
dc.treeJournal of Engineering Materials and Technology:;1979:;volume( 101 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record