Show simple item record

dc.contributor.authorAmit Bagchi
dc.contributor.authorJohn G. Lenard
dc.date.accessioned2017-05-08T23:06:52Z
dc.date.available2017-05-08T23:06:52Z
dc.date.copyrightApril, 1979
dc.date.issued1979
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26868#135_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/92217
dc.description.abstractTwo mathematical models proposed by Avitzur and valid for axially symmetrical square extrusion are tested for their ability to predict the maximum power required in single as well as multiple hole extrusion. Comparison to experimental results obtained using plumber’s lead shows good correlation. The most significant parameter is shown to be the total area reduction. The velocity field in multiple hole extrusion—which by necessity must be nonaxially symmetrical—appears not to affect the power required for extrusion.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Study of Multiple Hole Extrusion
dc.typeJournal Paper
dc.journal.volume101
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443664
dc.journal.fristpage135
dc.journal.lastpage138
dc.identifier.eissn1528-8889
dc.keywordsExtruding AND Symmetry (Physics)
dc.treeJournal of Engineering Materials and Technology:;1979:;volume( 101 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record