Show simple item record

dc.contributor.authorJ. Lemaitre
dc.contributor.authorA. Plumtree
dc.date.accessioned2017-05-08T23:06:51Z
dc.date.available2017-05-08T23:06:51Z
dc.date.copyrightJuly, 1979
dc.date.issued1979
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26870#284_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/92203
dc.description.abstractThe damage concept has been developed in terms of strain range in order to give a unified approach to high temperature failure. Interactive tests have been carried out on OFHC copper at 540°C and Sanicro 31 (Alloy 800) at 600°C. For the former, combined strain controlled low frequency and high frequency tests were undertaken whereas the latter metal was subjected to sequential tests involving monotonic creep and high frequency cycling. The damage concept based on non-linear accumulation predicted lives which were in agreement with those observed experimentally for the two materials.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleApplication of Damage Concepts to Predict Creep-Fatigue Failures
dc.typeJournal Paper
dc.journal.volume101
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443689
dc.journal.fristpage284
dc.journal.lastpage292
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsFatigue
dc.keywordsFailure
dc.keywordsHigh temperature
dc.keywordsMetals
dc.keywordsCopper AND Alloys
dc.treeJournal of Engineering Materials and Technology:;1979:;volume( 101 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record