Show simple item record

dc.contributor.authorJ. L. Yuen
dc.contributor.authorJ. F. Copeland
dc.date.accessioned2017-05-08T23:06:50Z
dc.date.available2017-05-08T23:06:50Z
dc.date.copyrightJuly, 1979
dc.date.issued1979
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26870#214_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/92193
dc.description.abstractThe fatigue crack growth rates of Type 316 stainless steel and 16-3-2 gas tungsten are welds were measured in air and high-carbon liquid sodium at 510°C (950°F) for secondary sodium loop Liquid Metal Fast Breeder Reactor applications. Loading variables such as low frequency, load ratio, and hold time at peak load were studied, Supporting studies show that carburization of crack faces occurs prior to any crack tip carburization for the crack sizes and load frequencies of this study. Thus, a carburization effect on da/dN is not shown for relatively short-term tests. Low stress intensity, ultra-tow frequency tests to simulate service would be required to show this effect. The crack growth rate curve for 16-8-2 welds was below Type 316 base metal curves for both air and high-carbon sodium at 510°C (950°F). Crack growth rate curves for Type 316 and 16-8-2 welds in high-carbon sodium were below the corresponding curves for air.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFatigue Crack Growth Behavior of Stainless Steel Type 316 Plate and 16-8-2 Weldments in Air and High-Carbon Liquid Sodium
dc.typeJournal Paper
dc.journal.volume101
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443680
dc.journal.fristpage214
dc.journal.lastpage223
dc.identifier.eissn1528-8889
dc.keywordsSodium
dc.keywordsStainless steel
dc.keywordsCarbon
dc.keywordsFatigue cracks
dc.keywordsFracture (Materials)
dc.keywordsCarburization
dc.keywordsStress
dc.keywordsWelded joints
dc.keywordsFrequency
dc.keywordsBase metals
dc.keywordsPeak load
dc.keywordsTungsten AND Liquid metal fast breeder reactors
dc.treeJournal of Engineering Materials and Technology:;1979:;volume( 101 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record