Show simple item record

dc.contributor.authorR. Brazill
dc.contributor.authorG. W. Simmons
dc.contributor.authorR. P. Wei
dc.date.accessioned2017-05-08T23:06:50Z
dc.date.available2017-05-08T23:06:50Z
dc.date.copyrightJuly, 1979
dc.date.issued1979
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26870#199_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/92191
dc.description.abstractSteels used in coal gasification vessels and piping (externals) can be exposed to mixtures of hydrogen, water vapor (steam), hydrogen sulfide, methane, carbon monoxide, carbon dioxide, and other gases at temperatures and pressures up to 600°K and 10 MPa. Such mixtures, under certain operating conditions, can either enhance or inhibit crack growth in these steels. As a part of a program to identify thermodynamic conditions for this enhancement or inhibition, fatigue crack growth experiments have been carried out on a 2-1/4Cr-1 Mo (ASTM A542, Class 2) steel in hydrogen, water vapor, and hydrogen sulfide at low pressures (below 133 kPa). The results indicate considerable enhancement of fatigue crack growth by some of these environments and also indicate that the apparent immunity of this material to stress corrosion cracking does not imply the same immunity to corrosion fatigue. The results will be discussed in terms of the influences of temperature, gas pressure and loading variables, and will be interpreted in terms of chemical reaction kinetics.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFatigue Crack Growth in 2-1/4-Cr-1Mo Steel Exposed to Hydrogen Containing Gases
dc.typeJournal Paper
dc.journal.volume101
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443678
dc.journal.fristpage199
dc.journal.lastpage204
dc.identifier.eissn1528-8889
dc.keywordsGases
dc.keywordsSteel
dc.keywordsFatigue cracks
dc.keywordsHydrogen
dc.keywordsTemperature
dc.keywordsWater vapor
dc.keywordsMixtures
dc.keywordsSteam
dc.keywordsVessels
dc.keywordsASTM International
dc.keywordsChemical kinetics
dc.keywordsPressure
dc.keywordsFatigue
dc.keywordsMethane
dc.keywordsFuel gasification
dc.keywordsStress corrosion cracking
dc.keywordsFracture (Materials)
dc.keywordsCarbon
dc.keywordsCoal
dc.keywordsCorrosion
dc.keywordsPipes AND Carbon dioxide
dc.treeJournal of Engineering Materials and Technology:;1979:;volume( 101 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record