Show simple item record

dc.contributor.authorF. H. Huang
dc.contributor.authorG. L. Wire
dc.date.accessioned2017-05-08T23:06:49Z
dc.date.available2017-05-08T23:06:49Z
dc.date.copyrightOctober, 1979
dc.date.issued1979
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26872#403_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/92187
dc.description.abstractLarge changes in strength and ductility of metals after irradiation are known to occur. The fracture toughness of irradiated metals, which is related to the combined strength and ductility of a material, may be significantly reduced and the potential for unstable crack extension increased. For relatively thin materials which retain substantial ductility, even after irradiation, the fracture behavior cannot be analyzed by linear elastic fracture mechanics techniques. Instead, the multispecimen R-curve method and J-integral analysis were used to develop an experimental approach to evaluate the fracture toughness of thin breeder reactor materials irradiated at elevated temperatures. Alloy A-286 was chosen for this work because the alloy exhibits elastic/plastic behavior and the fracture toughness data of thicker (12 mm) specimens were available for comparison. Technical problems associated with specimen buckling and remote handling were treated in this work. The results are discussed in terms of thickness criterion for plane strain.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTechniques Developed for Elevated Temperature Fracture Toughness Testing of Irradiated Materials in Thin Sections
dc.typeJournal Paper
dc.journal.volume101
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443710
dc.journal.fristpage403
dc.journal.lastpage406
dc.identifier.eissn1528-8889
dc.keywordsTemperature
dc.keywordsTesting
dc.keywordsFracture toughness
dc.keywordsDuctility
dc.keywordsMetals
dc.keywordsAlloys
dc.keywordsIrradiation (Radiation exposure)
dc.keywordsFracture (Process)
dc.keywordsBuckling
dc.keywordsPlane strain
dc.keywordsThickness
dc.keywordsBreeder reactors AND Fracture mechanics
dc.treeJournal of Engineering Materials and Technology:;1979:;volume( 101 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail
This item appears in the following Collection(s)

Show simple item record