Show simple item record

dc.contributor.authorErhard Krempl
dc.date.accessioned2017-05-08T23:06:49Z
dc.date.available2017-05-08T23:06:49Z
dc.date.copyrightOctober, 1979
dc.date.issued1979
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26872#380_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/92184
dc.description.abstractA previously proposed theory is specialized for the uniaxial state of stress and its prediction for creep and relaxation is analyzed in detail. Constant true stress and constant load creep tests are simulated in the presence and absence of thermal aging together with the constant strain relaxation test. The signs of the creep rate and its time derivative as well as the relaxation rate and its time derivative are introduced as criteria. The constant load creep test can reproduce the normal creep curves and nonclassical creep curves (ε̇ > 0; ε̈ > 0 for all ε and for σ0 > 0). The capabilities of the constant true stress test are limited to primary creep if the work-hardening slope is positive. When aging is introduced almost any creep curve can be reproduced in both tests. The importance of initial strain is discussed and demonstrated by room temperature creep tests on Type 304 Stainless Steel. It is suggested that the initial strains together with the creep curves be reported in the future. Poisson’s ratio in creep needs to be measured and tests are proposed which will enable a quantitative assessment of aging.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleViscoplasticity Based on Total Strain. The Modelling of Creep With Special Considerations of Initial Strain and Aging
dc.typeJournal Paper
dc.journal.volume101
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443706
dc.journal.fristpage380
dc.journal.lastpage386
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsModeling
dc.keywordsViscoplasticity
dc.keywordsStress
dc.keywordsRelaxation (Physics)
dc.keywordsStainless steel
dc.keywordsWork hardening
dc.keywordsPoisson ratio AND Temperature
dc.treeJournal of Engineering Materials and Technology:;1979:;volume( 101 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record