Show simple item record

dc.contributor.authorI. W. Goodall
dc.contributor.authorF. A. Leckie
dc.contributor.authorA. R. S. Ponter
dc.contributor.authorC. H. A. Townley
dc.date.accessioned2017-05-08T23:06:49Z
dc.date.available2017-05-08T23:06:49Z
dc.date.copyrightOctober, 1979
dc.date.issued1979
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26872#349_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/92178
dc.description.abstractThe paper summarizes some recent developments in the analysis of structures by use of bounding theorems and reference stress techniques. In many instances these techniques may be used by design engineers in simplifying the analysis of structures operating in the creep range. This is particularly true of components operating below a modified shakedown limit as the design methods need be no more complex than those currently used below the creep range. Above the modified shakedown limit bounding theorems may be used to determine deformations but require a cyclic elastic-plastic solution as a minimum requirement. The bounds however do allow a simplified treatment of the creep deformation to be made.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Development of High Temperature Design Methods Based on Reference Stresses and Bounding Theorems
dc.typeJournal Paper
dc.journal.volume101
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443701
dc.journal.fristpage349
dc.journal.lastpage355
dc.identifier.eissn1528-8889
dc.keywordsTheorems (Mathematics)
dc.keywordsStress
dc.keywordsDesign methodology
dc.keywordsHigh temperature
dc.keywordsCreep
dc.keywordsEngineers
dc.keywordsDeformation AND Design
dc.treeJournal of Engineering Materials and Technology:;1979:;volume( 101 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record