Show simple item record

dc.contributor.authorA. F. Conn
dc.contributor.authorR. P. Radtke
dc.date.accessioned2017-05-08T23:05:38Z
dc.date.available2017-05-08T23:05:38Z
dc.date.copyrightFebruary, 1978
dc.date.issued1978
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28159#52_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/91515
dc.description.abstractDrilling bits which exploit the destructive energy of cavitation are being developed. A systematic series of tests is now under way, first to establish feasibility, and then to define the effective adaptation of the CAVIJET™ cavitating water jet method for augmenting the cutting action of mechanical deep-hole drilling bits. Successful drilling tests, using a 1/4-in. (6.4-mm) CAVIJET nozzle, were performed at atmospheric pressure and in a test chamber which provided simulated wellbore pressures up to 3000 psi(21 MPa). The effect of back pressure on standoff distance, and a comparison of steady jet versus CAVIJET cutting efficiencies are discussed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCAVIJET™ Augmented Deep-Hole Drilling Bits
dc.typeJournal Paper
dc.journal.volume100
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454434
dc.journal.fristpage52
dc.journal.lastpage59
dc.identifier.eissn1528-8978
dc.keywordsDrilling
dc.keywordsCutting
dc.keywordsWater
dc.keywordsCavitation
dc.keywordsNozzles
dc.keywordsPressure AND Atmospheric pressure
dc.treeJournal of Pressure Vessel Technology:;1978:;volume( 100 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record