Show simple item record

dc.contributor.authorD. O. Harris
dc.date.accessioned2017-05-08T23:05:37Z
dc.date.available2017-05-08T23:05:37Z
dc.date.copyrightMay, 1978
dc.date.issued1978
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28162#150_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/91492
dc.description.abstractA technique is presented that allows the effect of periodic proof testing and nondestructive evaluation (NDE) on the reliability of cyclically loaded structures to be calculated. This technique combines the initial defect size and nondestructuve inspection detection probability with fracture mechanics calculations of fatigue crack growth and final fracture to predict the failure probability of a cyclically loaded structure as a function of the number of cycles of load application. The influence of part geometry, stress levels, material properties, inspection procedures and inspection interval enter into the analysis. The results of an example problem are presented which indicates that the benefits of proof testing are restricted to a fairly short period immediately following the proof test. The length of this period can be extended significantly by acoustic emission monitoring of the proof test. The benefits of an in-service inspection can be large or small, depending on the inspection interval, detection probabilities, and stress level. The capability of the techniques presented to quantitatively assess the influence of the many parameters involved should make these procedures useful in a wide variety of applications.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Means of Assessing the Effects of Periodic Proof Testing and NDE on the Reliability of Cyclically Loaded Structures
dc.typeJournal Paper
dc.journal.volume100
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454445
dc.journal.fristpage150
dc.journal.lastpage157
dc.identifier.eissn1528-8978
dc.keywordsReliability
dc.keywordsNondestructive evaluation
dc.keywordsTesting
dc.keywordsInspection
dc.keywordsProbability
dc.keywordsStress
dc.keywordsMaterials properties
dc.keywordsAcoustic emissions
dc.keywordsFracture (Process)
dc.keywordsCycles
dc.keywordsFailure
dc.keywordsFatigue cracks
dc.keywordsGeometry
dc.keywordsIn-service inspection AND Fracture mechanics
dc.treeJournal of Pressure Vessel Technology:;1978:;volume( 100 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record