Show simple item record

dc.contributor.authorJ. B. Truitt
dc.contributor.authorP. P. Raju
dc.date.accessioned2017-05-08T23:05:36Z
dc.date.available2017-05-08T23:05:36Z
dc.date.copyrightMay, 1978
dc.date.issued1978
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28162#134_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/91489
dc.description.abstractThis paper presents a comparative study between a three-dimensional and an axisymmetric finite-element analysis of a reactor pressure-vessel inlet nozzle subject to internal pressure. A quarter-symmetric section of the nozzle is modeled with a three-dimensional quadratic isoparametric finite element. This comparative study proves that the axisymmetric analysis is unconservative if based upon common axisymmetric modeling techniques. This inadequacy, for the PWR vessel inlet nozzle studied herein, can be offset by a modification of the modeling techniques, i.e., if the value of the radius of the equivalent spherical vessel is taken as 3.2 instead of, say, 2. The results of the three-dimensional finite-element analysis are also compared with those of a photo-elastic stress analysis and with the stress indices indicated by the ASME Section III Code. These additional comparisons, based upon a continuous distribution of hoop and tangential stress indices in both the transverse and longitudinal planes, shows good agreement between the three-dimensional finite-element and photoelastic analyses. The ASME Section III stress indices are found to be relatively conservative.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThree-Dimensional Versus Axisymmetric Finite-Element Analysis of a Cylindrical Vessel Inlet Nozzle Subject to Internal Pressure—A Comparative Study
dc.typeJournal Paper
dc.journal.volume100
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454443
dc.journal.fristpage134
dc.journal.lastpage140
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsFinite element analysis
dc.keywordsNozzles
dc.keywordsVessels
dc.keywordsStress
dc.keywordsModeling
dc.keywordsPressurized water reactors
dc.keywordsStress analysis (Engineering) AND Pressure vessels
dc.treeJournal of Pressure Vessel Technology:;1978:;volume( 100 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record