Show simple item record

dc.contributor.authorH. I. Epstein
dc.date.accessioned2017-05-08T23:05:36Z
dc.date.available2017-05-08T23:05:36Z
dc.date.copyrightAugust, 1978
dc.date.issued1978
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28165#310_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/91484
dc.description.abstractConical closures for cylindrical tanks are easily fabricated and hence would be economical if not for the large stresses developed at the sharp-cornered junction between cylinder and cone, especially for a fairly flat closure. The scalloped closure presented has been shown to retain most of the desired characteristics of the cone while carrying the loads more effectively. This results in substantial material savings. In order to understand how the scalloped closure resists the applied loads, the geometry must be thoroughly understood. The geometry necessary to analyze, design and fabricate the scalloped closure is presented.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleGeometry of Scalloped Closures for Cylindrical Vessels
dc.typeJournal Paper
dc.journal.volume100
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454472
dc.journal.fristpage310
dc.journal.lastpage312
dc.identifier.eissn1528-8978
dc.keywordsGeometry
dc.keywordsVessels
dc.keywordsStress
dc.keywordsDesign
dc.keywordsCylinders AND Junctions
dc.treeJournal of Pressure Vessel Technology:;1978:;volume( 100 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record