Show simple item record

dc.contributor.authorN. Inoue
dc.contributor.authorT. Nakayama
dc.contributor.authorM. Shimono
dc.date.accessioned2017-05-08T23:05:35Z
dc.date.available2017-05-08T23:05:35Z
dc.date.copyrightNovember, 1978
dc.date.issued1978
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28167#400_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/91469
dc.description.abstractCrystalline as well as amorphous polymers and a thermosetting resin were hydrostatically extruded with pressures up to 4 kilobars. A linear relation was obtained between the extrusion pressure and extrusion ratio. Temperature of the billets during the extrusion process was determined, along with the flow pattern of the deformation. Tension tests at the temperature, to which the billet was exposed during the extrusion, was carried out at atmospheric pressure on the high-density polyethylene specimen to supply a theoretical basis to the experimental formula. Effects of temperature and strain rate on the extrusion process are discussed in the light of the temperature-time superposition principle.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDeformation of Polymers During Hydrostatic Extrusion
dc.typeJournal Paper
dc.journal.volume100
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454487
dc.journal.fristpage400
dc.journal.lastpage405
dc.identifier.eissn1528-8978
dc.keywordsHydrostatics
dc.keywordsDeformation
dc.keywordsExtruding
dc.keywordsPolymers
dc.keywordsTemperature
dc.keywordsAtmospheric pressure
dc.keywordsTemperature effects
dc.keywordsDensity
dc.keywordsPressure
dc.keywordsFlow (Dynamics)
dc.keywordsFormulas
dc.keywordsResins AND Tension
dc.treeJournal of Pressure Vessel Technology:;1978:;volume( 100 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record