Show simple item record

dc.contributor.authorH. D. Billimoria
dc.contributor.authorJ. Hagstrom
dc.date.accessioned2017-05-08T23:05:35Z
dc.date.available2017-05-08T23:05:35Z
dc.date.copyrightNovember, 1978
dc.date.issued1978
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28167#389_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/91467
dc.description.abstractThe stiffness coefficients presented in this paper simulate the actual local translational and flexural restraint of the nozzle connection due to the attached tank shell. These coefficients can be conveniently incorporated into the analysis of the attached piping system to determine the imposed reactions at the pipe to nozzle junction. It is felt that including the stiffness coefficient will have an appreciable effect on the results of the piping analysis and will give a realistic prediction of the end forces at the nozzle connection. The acceptability of these end forces can be evaluated using the proposed criteria. The stiffness curves given in this paper can also be utilized to determine the elastic deformations of the tank shell for the calculated end forces at the nozzle connection due to the attached piping.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStiffness Coefficients and Allowable Loads for Nozzles in Flat-Bottom Storage Tanks
dc.typeJournal Paper
dc.journal.volume100
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454486
dc.journal.fristpage389
dc.journal.lastpage399
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsNozzles
dc.keywordsStiffness
dc.keywordsStorage tanks
dc.keywordsForce
dc.keywordsPipes
dc.keywordsShells
dc.keywordsJunctions
dc.keywordsPiping systems AND Deformation
dc.treeJournal of Pressure Vessel Technology:;1978:;volume( 100 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record