Show simple item record

dc.contributor.authorDonald F. Adams
dc.contributor.authorA. Keith Miller
dc.date.accessioned2017-05-08T23:04:57Z
dc.date.available2017-05-08T23:04:57Z
dc.date.copyrightJanuary, 1978
dc.date.issued1978
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26859#77_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/91120
dc.description.abstractThe stresses and strains induced in a composite material when subjected to mechanical loads are shown to be strongly influenced by prior exposure to both temperature changes (e.g., cooldown from the curing temperature) and moisture absorption (e.g., even normal exposure to ambient conditions after cure). These environmental effects are in turn influenced by normal variabilities in the basic properties of the composite constituents. Using a recently developed finite element numerical model of composite material inelastic hygrothermal response, variations in stresses and strains are predicted as a function of variations in constituent material properties. A typical graphite/epoxy composite is selected for detailed study. This system is of particular interest because of the anisotropic nature of graphite fibers, and the strong temperature and moisture dependence of the epoxy matrix. Specific fiber property variations considered include transverse modulus, major Poisson’s ratio, and in-plane Poisson’s ratio. Results are compared with those obtained for an isotropic fiber composite.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Influence of Material Variability on the Predicted Environmental Behavior of Composite Materials
dc.typeJournal Paper
dc.journal.volume100
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443454
dc.journal.fristpage77
dc.journal.lastpage83
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsStress
dc.keywordsTemperature
dc.keywordsEpoxy adhesives
dc.keywordsPoisson ratio
dc.keywordsFibers
dc.keywordsComputer simulation
dc.keywordsAbsorption
dc.keywordsGraphite fibers
dc.keywordsMaterials properties
dc.keywordsFinite element analysis
dc.keywordsCuring AND Graphite
dc.treeJournal of Engineering Materials and Technology:;1978:;volume( 100 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record