Show simple item record

dc.contributor.authorJ. M. Anderson
dc.contributor.authorC. S. Chu
dc.contributor.authorW. M. McGee
dc.date.accessioned2017-05-08T23:04:57Z
dc.date.available2017-05-08T23:04:57Z
dc.date.copyrightJanuary, 1978
dc.date.issued1978
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26859#52_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/91116
dc.description.abstractThe title problem was investigated experimentally and numerically. Aluminum adherends and two adhesives, AF-55 and AF-127, were utilized in the investigation. Each specimen had a crack introduced at an undoubled edge. Fatigue cycles with a fixed average remote-stress maximum of 103.4 MPa at a stress ratio of 0.1 were applied to grow the initial crack up to and beneath the doubler. Crack-growth rates were measured to assess the inhibiting effect of the doubler, and ultrasonic scans were made to determine debond-zone shapes. After each crack had grown approximately halfway beneath the doubler, a secondary crack initiated at the edge of the doubler, precipitating rupture of the specimen. A finite-element model of the specimen employed a singularity element to represent the crack-tip neighborhood and shear springs to represent the adhesive layer. Springs were released in the model to simulate local debonding. The stress-intensity factor was computed as a function of crack length for linear and nonlinear representations of the two adhesives used in the experimental program.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleGrowth Characteristics of a Fatigue Crack Approaching and Growing Beneath an Adhesively Bonded Doubler
dc.typeJournal Paper
dc.journal.volume100
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443450
dc.journal.fristpage52
dc.journal.lastpage56
dc.identifier.eissn1528-8889
dc.keywordsFatigue
dc.keywordsAluminum
dc.keywordsAdhesives
dc.keywordsStress
dc.keywordsShear (Mechanics)
dc.keywordsFracture (Materials)
dc.keywordsCycles
dc.keywordsFatigue cracks
dc.keywordsFinite element model
dc.keywordsRupture
dc.keywordsShapes AND Springs
dc.treeJournal of Engineering Materials and Technology:;1978:;volume( 100 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record