Show simple item record

dc.contributor.authorN. J. Pfeiffer
dc.contributor.authorJ. A. Alic
dc.date.accessioned2017-05-08T23:04:56Z
dc.date.available2017-05-08T23:04:56Z
dc.date.copyrightJanuary, 1978
dc.date.issued1978
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26859#32_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/91113
dc.description.abstractRates of fatigue crack propagation have been determined for adhesively bonded 7075-T6 laminates having a crack divider geometry. Two lamina thicknesses were used, the resulting laminates having either 8 or 22 layers. Crack growth rates were generally within the same range as for monolithic 7076-T6 alloy, and were somewhat slower in the 22-layer laminates than in those with 8 layers. Instances of decreasing crack propagation rate with increasing stress intensity amplitude, as well as of crack arrest, were observed. These are interpreted in terms of interactions between the layers during the progressive transition from a flat mode of crack growth to a slant mode.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFatigue Crack Propagation in 8- and 22-Layer 7075-T6 Aluminum Alloy Laminates
dc.typeJournal Paper
dc.journal.volume100
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443447
dc.journal.fristpage32
dc.journal.lastpage38
dc.identifier.eissn1528-8889
dc.keywordsLaminates
dc.keywordsAluminum alloys
dc.keywordsFatigue cracks
dc.keywordsFracture (Materials)
dc.keywordsCrack propagation
dc.keywordsStress
dc.keywordsGeometry AND Alloys
dc.treeJournal of Engineering Materials and Technology:;1978:;volume( 100 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record