| dc.contributor.author | R. L. Tobler | |
| dc.contributor.author | R. P. Reed | |
| dc.contributor.author | R. E. Schramm | |
| dc.date.accessioned | 2017-05-08T23:04:54Z | |
| dc.date.available | 2017-05-08T23:04:54Z | |
| dc.date.copyright | April, 1978 | |
| dc.date.issued | 1978 | |
| dc.identifier.issn | 0094-4289 | |
| dc.identifier.other | JEMTA8-26861#189_1.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/91097 | |
| dc.description.abstract | The mechanical properties of an eighteen percent nickel, solution-annealed 300-grade maraging steel were measured to assist in the evaluation of this material for low-temperature structural applications. Tensile, fatigue-crack growth rate, and fracture toughness tests were perfromed in ambient air (295 K), liquid nitrogen (76 K), and liquid helium (4 K), with the following results: (1) the yield strength of this material increases from 831 MPa at room temperature to 1596 MP a at 4 K; (2) the tensile ductility is moderate with elongation decreasing from 15.5 to 6.7 percent for this temperature region; (3) the estimated values of fracture toughness (KIc ) decrease from 165 MPa·m1/2 at room temperature to 83 MPa·m1/2 at 4 K; and (4) the fatigue-crack propagation resistance at intermediate stress intensity ranges is relatively insensitive to temperature. These results are compared with similar data for other cryogenic alloys. | |
| dc.publisher | The American Society of Mechanical Engineers (ASME) | |
| dc.title | Cryogenic Tensile, Fatigue, and Fracture Parameters for a Solution-Annealed 18 Percent Nickel Maraging Steel | |
| dc.type | Journal Paper | |
| dc.journal.volume | 100 | |
| dc.journal.issue | 2 | |
| dc.journal.title | Journal of Engineering Materials and Technology | |
| dc.identifier.doi | 10.1115/1.3443470 | |
| dc.journal.fristpage | 189 | |
| dc.journal.lastpage | 194 | |
| dc.identifier.eissn | 1528-8889 | |
| dc.keywords | Fatigue | |
| dc.keywords | Nickel | |
| dc.keywords | Steel AND Fracture (Process) | |
| dc.tree | Journal of Engineering Materials and Technology:;1978:;volume( 100 ):;issue: 002 | |
| dc.contenttype | Fulltext | |