Show simple item record

dc.contributor.authorHideo Awaji
dc.contributor.authorSennosuke Sato
dc.date.accessioned2017-05-08T23:04:54Z
dc.date.available2017-05-08T23:04:54Z
dc.date.copyrightApril, 1978
dc.date.issued1978
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26861#175_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/91095
dc.description.abstractThe disk test in which a circular specimen with an internal crack is subjected to diametral compression is used to investigate combined mode I and mode II fracture. The stress intensity factors in the disk test are calculated numerically by means of the boundary collocation procedure and the dislocation method. Special care was taken to analyze the effect of the compression anvils. This method has the advantage, of allowing successive measurement of mode I, mode II and the combined mode fracture toughness under the same conditions. Some kinds of graphite, plaster and marble are examined to obtain the fracture toughness values, KIC , KIIC and the combined mode fracture criterion.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCombined Mode Fracture Toughness Measurement by the Disk Test
dc.typeJournal Paper
dc.journal.volume100
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443468
dc.journal.fristpage175
dc.journal.lastpage182
dc.identifier.eissn1528-8889
dc.keywordsDisks AND Fracture toughness
dc.treeJournal of Engineering Materials and Technology:;1978:;volume( 100 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record