Show simple item record

dc.contributor.authorM. Sakata
dc.contributor.authorM. Kanzawa
dc.contributor.authorN. Ogure
dc.contributor.authorS. Aoki
dc.contributor.authorK. Tateishi
dc.date.accessioned2017-05-08T23:04:51Z
dc.date.available2017-05-08T23:04:51Z
dc.date.copyrightApril, 1978
dc.date.issued1978
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26861#128_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/91086
dc.description.abstractThe J-integral has been used as a fracture criterion for elastic-plastic behavior of metals. It may be pertinent to use the JIc concept for design or nondestructive inspection of rotating disks which have crack-like flaws and exhibit some amount of plastic behavior to fracture. JIc for cracked rotating disks of rotor forging steel is determined experimentally and is compared with that obtained using compact specimens. It is shown that prediction based on the compact tension tests agrees well with initiation of crack growth in rotating disks.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleJ-Integral Approach to Fracture of Rotating Disk
dc.typeJournal Paper
dc.journal.volume100
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443460
dc.journal.fristpage128
dc.journal.lastpage133
dc.identifier.eissn1528-8889
dc.keywordsFracture (Process) AND Rotating Disks
dc.treeJournal of Engineering Materials and Technology:;1978:;volume( 100 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record