Show simple item record

dc.contributor.authorG. F. Pittinato
dc.date.accessioned2017-05-08T23:04:50Z
dc.date.available2017-05-08T23:04:50Z
dc.date.copyrightJuly, 1978
dc.date.issued1978
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26863#313_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/91077
dc.description.abstractWater heat pipes were fabricated from 316, 347, and 430 stainless steel, Monel 400, CDA 715, Inconel 600, and Incoloy 800. All of these materials generated varying amounts of hydrogen gas during the first few days of operation. However, as the heat pipes continued to operate, the amount of gas in each heat pipe, excluding 430 stainless steel, decreased by permeating through the heat pipe walls. Inconel 600 appeared to be the most acceptable material for water heat pipes by returning to isothermal operation over a short time period. An equation based on a diffusion dependent mechanism was developed that predicts heat pipe performance recovery rates.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHydrogen Gas Generation in Water Heat Pipes
dc.typeJournal Paper
dc.journal.volume100
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443496
dc.journal.fristpage313
dc.journal.lastpage318
dc.identifier.eissn1528-8889
dc.keywordsHeat pipes
dc.keywordsHydrogen AND Water
dc.treeJournal of Engineering Materials and Technology:;1978:;volume( 100 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record