Show simple item record

dc.contributor.authorC. F. Shih
dc.contributor.authorD. Lee
dc.date.accessioned2017-05-08T23:04:50Z
dc.date.available2017-05-08T23:04:50Z
dc.date.copyrightJuly, 1978
dc.date.issued1978
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26863#294_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/91074
dc.description.abstractA simple extension of Hill’s formulation for anisotropic plasticity which accounts for the distortion of the yield surface, Mij , the strength differential between tension and compression, αi and the effective size of the loading surface, k, has been proposed. These material parameters, Mij , αi , and k, define the initial state of the material and vary with plastic deformation. The parameters describing the anisotropic state are determined from uniaxial tension and compression tests along the principal axes. It is shown that the yield stresses in tension and compression along the three principal axes are related by a constraint equation when the condition of incompressibility is imposed. Experimental data obtained from several anisotropic materials are reasonably consistent with the constraint equation. The anisotropic plasticity formulation is also shown to describe the yield surface of different HCP metals more closely than the Hill’s theory. Based on the proposed formulation, finite element calculations have been made for the notched and the three-point bend specimens. The calculated load-deflection relationships are in good agreement with the experimental results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFurther Developments in Anisotropic Plasticity
dc.typeJournal Paper
dc.journal.volume100
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443493
dc.journal.fristpage294
dc.journal.lastpage302
dc.identifier.eissn1528-8889
dc.keywordsPlasticity
dc.treeJournal of Engineering Materials and Technology:;1978:;volume( 100 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record