Show simple item record

dc.contributor.authorD. E. McCabe
dc.contributor.authorJ. D. Landes
dc.date.accessioned2017-05-08T23:04:50Z
dc.date.available2017-05-08T23:04:50Z
dc.date.copyrightJuly, 1978
dc.date.issued1978
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26863#258_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/91069
dc.description.abstractThe principal purpose of this investigation was to study specimen size effects on elastic-plastic type R-curve using HY130 steel plate. Compact specimens ranging in size from 12T to 1T in planar dimensions and standardized on 1-inch thickness were used. Using an elastic-plastic concept developed in a companion program, it was shown that the R-curve is specimen size independent, even when nominal stress was well beyond general yield and the crack was propagating beyond maximum load. Using this observation, it is shown how instability can ge predicted under conditions ranging from elastic-plastic to fully plastic. This establishes the ground work for future studies on how R-curve is affected by specimen type or by stress triaxiality conditions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleElastic-Plastic R-Curves
dc.typeJournal Paper
dc.journal.volume100
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443488
dc.journal.fristpage258
dc.journal.lastpage266
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsDimensions
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsStress AND Thickness
dc.treeJournal of Engineering Materials and Technology:;1978:;volume( 100 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record