Show simple item record

dc.contributor.authorC. H. LaForce
dc.contributor.authorJ. Morrison
dc.date.accessioned2017-05-08T23:04:49Z
dc.date.available2017-05-08T23:04:49Z
dc.date.copyrightJuly, 1978
dc.date.issued1978
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26863#248_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/91066
dc.description.abstractThe proposed standard C-shaped Specimen for KIc determinations according to ASTM E399 is readily adaptable to load line deflection measurement, and thus to J-integral assessment, using procedures currently being developed for other geometries. Tests have been conducted on quenched and tempered steels to provide comparisons of JIc and KIc using both C-shaped and compact tension specimens. The effect of specimen thickness on the crack growth resistance curve and JIc has also been examined and analyzed in relation to the allowed thickness range for the proposed test method. The Merkle and Corten corrections for the C-shaped Specimen have been calculated and compared to those for other specimen geometries. J estimates based on total displacement measurements have been found to be acceptable even at short relative crack depths.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleJIc Determination Using the Proposed Standard C-Shaped Specimen
dc.typeJournal Paper
dc.journal.volume100
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443486
dc.journal.fristpage248
dc.journal.lastpage252
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsElectrical resistance
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsDeflection
dc.keywordsDisplacement measurement
dc.keywordsTension
dc.keywordsThickness AND ASTM International
dc.treeJournal of Engineering Materials and Technology:;1978:;volume( 100 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record