Show simple item record

dc.contributor.authorAlice M. Agogino
dc.date.accessioned2017-05-08T23:04:48Z
dc.date.available2017-05-08T23:04:48Z
dc.date.copyrightOctober, 1978
dc.date.issued1978
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26865#348_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/91047
dc.description.abstractA review of the literature on testing of notched specimens is provided with emphasis on short-term notched bar tension tests. The effects of notch geometry, stress state, and smooth-bar tensile properties on notched ductility, notch sensitivity, and mode of fracture are discussed. For design against failure due to notch weakening, a simple criterion based on a limiting value of notched ductility is proposed. Notched ductility for the metals considered in this study, can be approximated by the reduction in and from a smooth tension test divided by a tensile stress triaxiality factor that is proportional to the ratio of hydrostatic to octahedral shearing stresses associated with the notch.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNotch Effects, Stress State, and Ductility
dc.typeJournal Paper
dc.journal.volume100
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3443503
dc.journal.fristpage348
dc.journal.lastpage355
dc.identifier.eissn1528-8889
dc.keywordsStress
dc.keywordsDuctility
dc.keywordsTension
dc.keywordsHydrostatics
dc.keywordsMetals
dc.keywordsDesign
dc.keywordsFracture (Process)
dc.keywordsTesting
dc.keywordsFailure
dc.keywordsGeometry AND Shearing
dc.treeJournal of Engineering Materials and Technology:;1978:;volume( 100 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record