Show simple item record

dc.contributor.authorH. D. Shoemaker
dc.contributor.authorR. R. Haynes
dc.contributor.authorS. H. Advani
dc.contributor.authorL. Z. Shuck
dc.date.accessioned2017-05-08T23:03:46Z
dc.date.available2017-05-08T23:03:46Z
dc.date.copyrightFebruary, 1977
dc.date.issued1977
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28141#192_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/90416
dc.description.abstractMechanical properties of coal have been determined in an effort to advance in situ coal gasification technology. Tests and apparatus were developed to evaluate the directional compressive and shear properties of coal at elevated temperatures. Both creep and stress-relaxation experiments were conducted to evaluate the creep compliance and stress-relaxation properties in compression and shear, at temperatures between 75° and 650°F (24° and 343°C), for the face cleat, butt cleat and normal to coalbed orientation, and four different specimen sizes. Stress-strain relations and ultimate strengths were also determined at three different loading rates for these directions and temperatures. A shift function was used to represent the creep and stress relaxation properties as functions of time and temperature. Four- and six-parameter viscoelastic fluid models were used to represent the data over the time-temperature ranges. Shallow and deep mine coal from the Pittsburgh coalbed was tested. The coal was found to have the greatest ultimate strength and elastic moduli at 200°F (93°C) in all directions in both compression and shear, and to be specimen size dependent. The ultimate strength in the normal to coalbed direction was approximately twice that in the face and butt cleat directions at all temperatures. At 575° to 650°F (302° – 343°C), the coal becomes fluidic and is well represented by a four-parameter fluid model. It also obeys the time-temperature superposition principle.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Mechanical Properties of the Pittsburgh Coal at Elevated Temperatures
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454508
dc.journal.fristpage192
dc.journal.lastpage198
dc.identifier.eissn1528-8978
dc.keywordsTemperature
dc.keywordsMechanical properties
dc.keywordsCoal
dc.keywordsCreep
dc.keywordsRelaxation (Physics)
dc.keywordsStress
dc.keywordsShear (Mechanics)
dc.keywordsCompression
dc.keywordsTensile strength
dc.keywordsViscoelastic fluids
dc.keywordsStress-strain relations
dc.keywordsElastic moduli
dc.keywordsFuel gasification
dc.keywordsFunctions AND Fluids
dc.treeJournal of Pressure Vessel Technology:;1977:;volume( 099 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record