Show simple item record

dc.contributor.authorC. Popelar
dc.contributor.authorA. R. Rosenfield
dc.contributor.authorM. F. Kanninen
dc.date.accessioned2017-05-08T23:03:42Z
dc.date.available2017-05-08T23:03:42Z
dc.date.copyrightFebruary, 1977
dc.date.issued1977
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28141#112_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/90401
dc.description.abstractPrevious work at Battelle-Columbus on the development of a theoretical model for unstable crack propagation and crack arrest in a pressurized pipeline is extended in this paper by including the effect of backfill. The approach being developed involves four essential aspects of crack propagation in pipelines. These four components of the problem are: 1 – a shell theory characterization of the dynamic deformation of a pipe with a plastic yield-hinge behind an axially propagating crack, 2 – a fluid-mechanics treatment of the axial variations in the gas pressure acting on the pipe walls, 3 – an energy-based dynamic fracture mechanics formulation for the crack-driving force, and 4 – measured values of the dynamic energy absorption rate for pipeline steels. Comparisons given in the paper show that the steady-state crack speeds predicted by the model are in reasonably good agreement with the crack speeds measured in full-scale tests, both with and without backfill. The analysis further reveals the existence of a maximum steady-state crack-driving force as a function of the basic mechanical properties of the pipe steel and the pipeline goemetry and operating conditions. Quantitative estimates of this quantity provided by the model offer a basis for comparison with the empirical crack-arrest design criteria for pipelines developed by AISI, the American Gas Association, the British Gas Council, and British Steel. These are also shown to be in substantial agreement with the predictions of the model developed in this paper.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSteady-State Crack Propagation in Pressurized Pipelines
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454493
dc.journal.fristpage112
dc.journal.lastpage121
dc.identifier.eissn1528-8978
dc.keywordsPressure pipes
dc.keywordsCrack propagation
dc.keywordsSteady state
dc.keywordsFracture (Materials)
dc.keywordsPipelines
dc.keywordsPipes
dc.keywordsSteel
dc.keywordsForce
dc.keywordsPressure
dc.keywordsFluid mechanics
dc.keywordsDeformation
dc.keywordsFracture mechanics
dc.keywordsMechanical properties
dc.keywordsDesign
dc.keywordsAbsorption
dc.keywordsHinges AND Shells
dc.treeJournal of Pressure Vessel Technology:;1977:;volume( 099 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record