Show simple item record

dc.contributor.authorA. S. Kobayashi
dc.contributor.authorN. Polvanich
dc.contributor.authorA. F. Emery
dc.contributor.authorW. J. Love
dc.date.accessioned2017-05-08T23:03:42Z
dc.date.available2017-05-08T23:03:42Z
dc.date.copyrightFebruary, 1977
dc.date.issued1977
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28141#83_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/90397
dc.description.abstractStress intensity factors of pressurized surface cracks at the internal surface and un-pressurized surface cracks at the external surface of an internally pressurized cylinder are estimated from stress intensity factors of a semi-elliptical crack in a finite-thickness flat plate. Curvature effects of the cylinder are determined by comparing two-dimensional finite element solutions of fixed-grip, single edge-notched plates and single edge-notched cylinders. Stress intensity factors for semi-elliptical cracks with crack aspect ratios of b/a = 0.2 and 0.98 at crack depths up to 80 percent of the cylindrical wall thickness are shown for internally pressurized cylinders with outer to inner diameter ratios, Ro /Ri , ranging from 10:9 to 5:4 for outer surface cracks and to 3:2 for inner surface cracks.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInner and Outer Cracks in Internally Pressurized Cylinders
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454523
dc.journal.fristpage83
dc.journal.lastpage89
dc.identifier.eissn1528-8978
dc.keywordsFracture (Materials)
dc.keywordsCylinders
dc.keywordsSurface cracks
dc.keywordsStress
dc.keywordsThickness
dc.keywordsWall thickness
dc.keywordsFlat plates
dc.keywordsFinite element analysis AND Plates (structures)
dc.treeJournal of Pressure Vessel Technology:;1977:;volume( 099 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record