Show simple item record

dc.contributor.authorD. Bushnell
dc.contributor.authorG. D. Galletly
dc.date.accessioned2017-05-08T23:03:42Z
dc.date.available2017-05-08T23:03:42Z
dc.date.copyrightFebruary, 1977
dc.date.issued1977
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28141#39_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/90393
dc.description.abstractSeveral aluminum and mild steel torispherical heads were tested by Galletly and by Kirk and Gill and subsequently analyzed by Bushnell with use of the BOSOR5 computer program. The thinnest specimens buckled at pressures for which part of the toroidal knuckle was stressed well beyond the yield point. The analysis includes large deflection effects, nonlinear material behavior, and meridional variation of the thickness. The calculated strains in the thicker specimens agree reasonably well with the test results, but the calculated prebuckling strains in the thinnest specimens are generally greater than the values measured in the torodial knuckle after the onset of plastic flow. Reasonably good agreement between test and theory is obtained for the buckling pressures of aluminum specimens, but the calculated buckling pressures for mild steel specimens are much lower than the observed values, a discrepancy that is attributed to circumferentially varying thickness and possible inability of the analytical model of the elastic-plastic material to predict accurately the state of stress in the toroidal knuckle where loading is nonproportional once yielding has occurred.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStress and Buckling of Internally Pressurized, Elastic-Plastic Torispherical Vessel Heads—Comparisons of Test and Theory
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454519
dc.journal.fristpage39
dc.journal.lastpage53
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsBuckling
dc.keywordsVessels
dc.keywordsAluminum
dc.keywordsSteel
dc.keywordsThickness
dc.keywordsDeformation
dc.keywordsComputer software
dc.keywordsDeflection AND Yield point
dc.treeJournal of Pressure Vessel Technology:;1977:;volume( 099 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record