Show simple item record

dc.contributor.authorA. C. Pols
dc.date.accessioned2017-05-08T23:03:41Z
dc.date.available2017-05-08T23:03:41Z
dc.date.copyrightMay, 1977
dc.date.issued1977
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28148#353_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/90378
dc.description.abstractThe potential penetration rates of high-pressure jet bits drilling in hard rocks have been investigated experimentally. It has been found that the rates of penetration are much lower in hard, impermeable rock than in permeable rock [1]. Test results indicate that a laminated rock (Martelange schist) cannot be cut by jets at a high rate, which calls for hybrid bits. Isotropic rock can be jet-drilled at higher than conventional drilling rates, which may become profitable at daily rig costs in excess of approximately $20,000.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHigh-Pressure Jet-Drilling Experiments in Some Hard Rocks
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454541
dc.journal.fristpage353
dc.journal.lastpage361
dc.identifier.eissn1528-8978
dc.keywordsDrilling
dc.keywordsHigh pressure (Physics)
dc.keywordsRocks AND Jets
dc.treeJournal of Pressure Vessel Technology:;1977:;volume( 099 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record