Show simple item record

dc.contributor.authorA. Imazu
dc.contributor.authorK. Okabayashi
dc.contributor.authorR. Miura
dc.contributor.authorK. Nakumura
dc.contributor.authorT. Nagata
dc.date.accessioned2017-05-08T23:03:40Z
dc.date.available2017-05-08T23:03:40Z
dc.date.copyrightMay, 1977
dc.date.issued1977
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28148#291_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/90371
dc.description.abstractThis paper describes the results of test on elastic-plastic-creep behavior of a 12-in. Sch. 20 type 304 stainless steel elbow-pipe assembly subjected to in-plane moment loading at 600°C (1112°F). During the test, loads at seven different levels were applied to the specimen. In each stage of the test, the load, deflection, strains at specific locations, and ovalization of the cross section were measured. The results were compared with Spence’s theoretical predictions on the stationary creep behavior of smooth curved pipes and the inelastic solutions obtained by the MARC finite element analysis program.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleElevated Temperature Elastic-Plastic-Creep Test of an Elbow Subjected to In-Plane Moment Loading
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454534
dc.journal.fristpage291
dc.journal.lastpage297
dc.identifier.eissn1528-8978
dc.keywordsCreep
dc.keywordsTemperature
dc.keywordsStress
dc.keywordsPipes
dc.keywordsDeflection
dc.keywordsStainless steel
dc.keywordsFinite element analysis AND Manufacturing
dc.treeJournal of Pressure Vessel Technology:;1977:;volume( 099 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record