Show simple item record

dc.contributor.authorJ. M. Bloom
dc.contributor.authorW. A. Van Der Sluys
dc.date.accessioned2017-05-08T23:03:39Z
dc.date.available2017-05-08T23:03:39Z
dc.date.copyrightAugust, 1977
dc.date.issued1977
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28151#477_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/90355
dc.description.abstractThis paper evaluates eight different analytical procedures used in determining elastic stress intensity factors for gradient or nonlinear stress fields. From a fracture viewpoint, the main interest in this problem comes from the nuclear industry where the safety of the nuclear system is of concern. A fracture mechanics analysis is then required to demonstrate the vessel integrity under these postulated accident conditions. The geometry chosen for his study is that of a 10-in. thick flawed plate with nonuniform stress distribution through the thickness. Two loading conditions are evaluated, both nonlinear and both defined by polynomials. The assumed cracks are infinitely long surface defects. Eight methods are used to find the stress intensity factor: 1–maximum stress, 2–linear envelope, 3–linearization over the crack length from ASME Code, Section XI, 4–equivalent linear moment from ASME Code, Section III, Appendix G for thermal loadings, 5–integration method from WRC 175, Appendix 4 for thermal loadings, 6–8-node singularity (quarter-point) isoparametric element in conjunction with the displacement method, 7–polynomial method, and 8–semi-infinite edge crack linear distribution over crack. Comparisons are made between all eight procedures with the finding that the methods can be ranked in order of decreasing conservatism and ease of application as follows: 1–maximum stress, 2–linear envelope, 3–linearization over the crack length, 4–polynomial method, and 5–singularity element method. Good agreement is found between the last three of these methods. The remaining three methods produce nonconservative results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDetermination of Stress Intensity Factors for Gradient Stress Fields
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454562
dc.journal.fristpage477
dc.journal.lastpage484
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsGradients
dc.keywordsPolynomials
dc.keywordsASME Standards
dc.keywordsFracture mechanics
dc.keywordsSafety
dc.keywordsProduct quality
dc.keywordsThickness
dc.keywordsVessels
dc.keywordsStress concentration
dc.keywordsAccidents
dc.keywordsFracture (Process)
dc.keywordsDisplacement AND Geometry
dc.treeJournal of Pressure Vessel Technology:;1977:;volume( 099 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record