Show simple item record

dc.contributor.authorR. R. Seeley
dc.contributor.authorA. L. Lowe
dc.contributor.authorW. A. Van Der Sluys
dc.date.accessioned2017-05-08T23:03:38Z
dc.date.available2017-05-08T23:03:38Z
dc.date.copyrightAugust, 1977
dc.date.issued1977
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28151#419_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/90348
dc.description.abstractLarge bolts manufactured from SA540 Grades B23 and B24 are used on nuclear reactor vessels and require certain minimum mechanical properties. A minimum fracture toughness of 125 ksi in. (137 MPa m) at maximum operating stresses is required by the Nuclear Regulatory Commission for these bolts. This minimum toughness property was determined by a stress analysis of a bolt. Minimum required Charpy impact properties were calculated by a fracture toughness-Charpy impact energy correlation and the minimum calculated fracture toughness. The fracture toughness, yield strength and Charpy V notch impact properties were determined for five commercial heats of SA540 steels. Correlations between the fracture toughness and Charpy impact properties of these materials were evaluated. The toughness-impact energy correlation used to set the minimum required Charpy impact properties was found to be unduly conservative, and a different correlation of these properties is suggested. The SA540 steels investigated exhibited fracture toughness properties in excess of the NRC minimum requirements.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFracture Toughness Properties of SA540 Steels for Nuclear Bolting Applications
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454555
dc.journal.fristpage419
dc.journal.lastpage426
dc.identifier.eissn1528-8978
dc.keywordsSteel
dc.keywordsFracture toughness
dc.keywordsToughness
dc.keywordsVessels
dc.keywordsYield strength
dc.keywordsStress
dc.keywordsStress analysis (Engineering)
dc.keywordsMechanical properties
dc.keywordsFracture (Process) AND Nuclear reactors
dc.treeJournal of Pressure Vessel Technology:;1977:;volume( 099 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record