Show simple item record

dc.contributor.authorT. W. Thompson
dc.contributor.authorS. Sen
dc.contributor.authorK. E. Gray
dc.contributor.authorT. F. Edgar
dc.date.accessioned2017-05-08T23:03:38Z
dc.date.available2017-05-08T23:03:38Z
dc.date.copyrightNovember, 1977
dc.date.issued1977
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28155#634_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/90339
dc.description.abstractTests have been carried out to quantify the variation in permeability of Texas lignite with drying and with applied stress. It has been shown that the matrix permeability of lignite may be increased from effectively zero to the order of 10 darcies by removing about 20 percent by weight of water. In addition, an increase of confining pressure after drying will reduce the permeability, but only by about one order of magnitude. Drying of the matrix thus may produce matrix permeabilities of the same order as the undried field fracture permeability. The permeability increase of the matrix is initially greater parallel to the bedding than perpendicular, but after further drying the two orientations show similar final permeabilities. This drying effect could have a significant influence on the operation of an in-situ gasification process by increasing the transmissivity and injectivity of the producing seam. Drying of the seam could occur by the flow of unsaturated gas and will be enhanced by combustion.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Influence of Drying and Stress on the Permeability of Texas Lignite
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454586
dc.journal.fristpage634
dc.journal.lastpage640
dc.identifier.eissn1528-8978
dc.keywordsPermeability
dc.keywordsDrying
dc.keywordsStress
dc.keywordsFracture (Process)
dc.keywordsFuel gasification
dc.keywordsWater
dc.keywordsWeight (Mass)
dc.keywordsPressure
dc.keywordsFlow (Dynamics) AND Combustion
dc.treeJournal of Pressure Vessel Technology:;1977:;volume( 099 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record