Show simple item record

dc.contributor.authorR. R. Hendrickson
dc.contributor.authorC. Carwile
dc.contributor.authorL. Matson
dc.contributor.authorR. W. Winzenried
dc.date.accessioned2017-05-08T23:03:37Z
dc.date.available2017-05-08T23:03:37Z
dc.date.copyrightNovember, 1977
dc.date.issued1977
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28155#614_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/90334
dc.description.abstractA significant factor contributing to short bit life and attendant high costs for geothermal drilling is the lack of seals for elevated temperatures. To assist development of a high-temperature seal, a test facility was constructed to simulate the seal environment in a roller bit during geothermal drilling. Although none of the tested elastomers appear suitable for compression seals above 200°C, extensive testing was performed to determine their exact limits. Several new heterogeneous seal designs were found usable to higher temperatures.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSeals for Geothermal Roller Drill Bits
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454582
dc.journal.fristpage614
dc.journal.lastpage618
dc.identifier.eissn1528-8978
dc.keywordsBits (Tools)
dc.keywordsGeothermal engineering
dc.keywordsRollers
dc.keywordsTemperature
dc.keywordsDrilling
dc.keywordsElastomers
dc.keywordsTest facilities
dc.keywordsHigh temperature
dc.keywordsTesting AND Compression
dc.treeJournal of Pressure Vessel Technology:;1977:;volume( 099 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record