Show simple item record

dc.contributor.authorH. D. Murphy
dc.contributor.authorR. G. Lawton
dc.date.accessioned2017-05-08T23:03:37Z
dc.date.available2017-05-08T23:03:37Z
dc.date.copyrightNovember, 1977
dc.date.issued1977
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28155#607_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/90332
dc.description.abstractThe line source method of determining thermal conductivity is extended to include the transient effect associated with the fluid in flowing geothermal wells. The general equations describing transient heat flow are utilized. Approximate solutions are derived and compared to the exact solution of the general equations. The proposed method is operationally simple since the heater, and the associated problems of obtaining adequate thermal contact between the heater and the sides of the borehole are eliminated. Using this method downhole measurements were obtained and favorably compared with laboratory measurements on characterized core specimens taken from wells in a hot dry rock geothermal reservoir.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDownhole Measurements of Thermal Conductivity in Geothermal Reservoirs
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454580
dc.journal.fristpage607
dc.journal.lastpage611
dc.identifier.eissn1528-8978
dc.keywordsMeasurement
dc.keywordsReservoirs
dc.keywordsGeothermal engineering
dc.keywordsThermal conductivity
dc.keywordsEquations
dc.keywordsWells
dc.keywordsFlow (Dynamics)
dc.keywordsFluids
dc.keywordsRocks AND Transient heat
dc.treeJournal of Pressure Vessel Technology:;1977:;volume( 099 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record