Show simple item record

dc.contributor.authorJ. N. C. Wu
dc.contributor.authorJ. F. Cory
dc.date.accessioned2017-05-08T23:03:37Z
dc.date.available2017-05-08T23:03:37Z
dc.date.copyrightNovember, 1977
dc.date.issued1977
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28155#600_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/90331
dc.description.abstractThe best way to design a nuclear steam generating system to withstand seismic stresses is to establish a mathematical model, to which seismic loading can be applied, to determine the dynamic responses of the system. A practical approach for establishing such a model is to idealize the components in terms of beam elements which form the essential building blocks of the analytical model. The major shell structures of reactor vessels and steam generators are usually supported at a single elevation in the system, and are often simulated by cantilever beam elements. The use of a beam element to represent shell structure must be justified. This paper presents the results of a parametric study of thin-walled cylindrical shells which are clamped at one end while the other end is free. By using 3-D plate/shell finite element analysis, the region of application, where the beam element can reasonably simulate to shell structure, has been defiined as the combination of its geometrical parameters, e.g., the thickness/radius and length/radius. As an illustrative example, the 3-D finite element method has been used to investigate the seismic analysis of a cantilever cylindrical shell similar to the Clinch River LMFBR reactor vessel. The numerical values are compared with those produced by a beam element model. The results and conclusions obtained by this investigation can be applied to improve dynamic modeling techniques in general.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSeismic Design Study on Cantilever Cylindrical Shells
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454579
dc.journal.fristpage600
dc.journal.lastpage604
dc.identifier.eissn1528-8978
dc.keywordsEarthquake resistant design
dc.keywordsPipes
dc.keywordsCantilevers
dc.keywordsShells
dc.keywordsReactor vessels
dc.keywordsLiquid metal fast breeder reactors
dc.keywordsCantilever beams
dc.keywordsSteam
dc.keywordsThickness
dc.keywordsRivers
dc.keywordsDynamic modeling
dc.keywordsDynamic response
dc.keywordsSeismic analysis
dc.keywordsBlocks (Building materials)
dc.keywordsStress
dc.keywordsFinite element methods
dc.keywordsBoilers
dc.keywordsDesign AND Finite element analysis
dc.treeJournal of Pressure Vessel Technology:;1977:;volume( 099 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record