Show simple item record

dc.contributor.authorJ. S. Porowski
dc.contributor.authorW. J. O’Donnell
dc.contributor.authorJ. R. Farr
dc.date.accessioned2017-05-08T23:03:36Z
dc.date.available2017-05-08T23:03:36Z
dc.date.copyrightNovember, 1977
dc.date.issued1977
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28155#646_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/90318
dc.description.abstractLimit pressures are evaluated for cylindrical perforated shells containing circular holes arranged in the various penetration patterns typically found in practice. Statically admissible discontinuous fields of stress are used to obtain rigorous lower-bound limit pressures. These solutions are shown to be quite close to the actual limit pressures based on the efficiency of the discontinuous fields of stress and a comparison with upper-bound solutions. The optimal spacing parameters are obtained over the interesting range of ligament efficiencies for both the diamond (romboidal) and rectangular penetration patterns. The results of this work show that for most penetration configurations, the present ASME standards require substantially thicker shells than would be needed to maintain the same safety factors that are used for unperforated shells. On the other hand, the British and German standards allow the use of thinner shells than would be needed to maintain the safety factors for unperforated shells. Revised design curves which provide the same margin of safety for all configurations are derived and are proposed for use in design standards.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLimit Design of Perforated Cylindrical Shells per ASME Code
dc.typeJournal Paper
dc.journal.volume99
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454588
dc.journal.fristpage646
dc.journal.lastpage651
dc.identifier.eissn1528-8978
dc.keywordsDesign
dc.keywordsPipes
dc.keywordsASME Standards
dc.keywordsShells
dc.keywordsSafety
dc.keywordsStress AND Diamonds
dc.treeJournal of Pressure Vessel Technology:;1977:;volume( 099 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record